Ivoclar Vivadent Bluephase PowerCure Instrucciones De Uso página 10

Application
Battery
The battery must be fully charged before it is used for the first time! When
fully charged, the battery features a curing capacity of at least 20 minutes
in the High Power program, approx. 15 minutes in the Turbo program and
approx. 8 minutes in the 3-second curing program (3sCure).
Slide the battery straight into the handpiece until you hear and feel it click
into place.
Gently place the handpiece in the corresponding rest in the charging base
without using any force. If a hygiene sleeve is used, please remove it before
you charge the battery. If possible, always use the light with a fully charged
battery. This will prolong the service life. We therefore recommend placing
the handpiece into the charging base after each patient. If the battery is
fully discharged, the charging time is 2 hours.
The battery is an expendable part that typically needs to be replaced after
approximately 2.5 years. See battery label for the age of the battery.
Battery: charging status
The current charging status is displayed on the handpiece as described
on page 6.
Click & Cure corded operation
Bluephase PowerCure can be used in corded operation mode at any time
and particularly when the battery is completely empty. For corded operation,
release the battery by pressing on the release button on the lower part of
the handpiece and then pull the battery out of the handpiece completely.
Then remove the power pack from the underside of the charging base.
Do not pull on the power cord.
Insert the connection plug straight into the handpiece until you hear and
feel it click into place.
During corded operation, the charging base cannot charge the battery,
since it is not connected to a power source.
A complete disconnection from the power supply is only ensured when the
power cord is disconnected from the power socket.
10