Ivoclar Vivadent Bluephase PowerCure Instrucciones De Uso página 7

2 Intended Use
Intended purpose
Polymerization of light-curing dental materials
Intended users / Special training
– Dentists (clinical procedure)
– Dental assistants (clinical procedure)
– No special training required
Application
For dental use only.
Description
Bluephase PowerCure is an LED curing light that produces blue light. It is used for the polymerization of light-curing
dental materials directly in the oral cavity of patients. The curing light is intended for use by the dentist or dental
assistant at the dental practice, medical practice or hospital. Intended use also assumes the observation of the notes
and regulations in these Instructions for Use. Intended use: light-curing of dental materials.
Indications
None
Areas of application:
Polymerization of light-curing dental materials in the wavelength range of 385-515 nm, including filling materials,
dental adhesives, cavity liners, bases, fissure sealants, temporary restorations, luting materials for brackets and
indirect restorations (e.g. ceramic inlays).
Contraindications
None
Limitations of use
Materials whose polymerization is activated outside the wavelength range of 385 – 515 nm (no such materials
known to date). If you are not sure about certain products, please ask the manufacturer of the corresponding
material.
Do not charge or use the appliance near flammable or combustible substances.
Never use without light guide.
The use of a light guide other than the one provided in the delivery form is not admissable.
Using the device stacked on or close to other equipment should be avoided because correct function can be
disrupted. If such use is unavoidable, the device needs to be monitored and checked for correct function.
Portable and mobile high-frequency communication devices may interfere with medical equipment.
The use of mobile phones during operation is not allowed.
Caution – The use of control or adjustment devices or performing procedures other than those specified
herein may result in hazardous radiation exposure.
Never use without eye protection for patients and users.
If the light emission window cannot be optimally placed in relation to the composite restoration, the
restoration must be polymerized using a conventional method. If soft tissue exposure to the curing light
cannot be avoided, the 3sCure program must not be used, as exposure may result in damage of the soft
tissues.
The 3sCure program (3,000 mW/cm
(Class I & II) in combination with Tetric PowerFill, Tetric PowerFlow or Adhese Universal. Do not use the
3sCure program in cases of deep cavities (caries profunda).
The 3sCure curing mode (3,000 mW/cm
) must only be used for direct restorations in the posterior region
2
) must not be used for deciduous teeth.
2
7