Publicidad
Idiomas disponibles
Idiomas disponibles
Application
Observe the Instructions for Use of the material applied when selecting the curing time and intensity. The curing
recommendations for composite materials apply to all shades and, if not mentioned otherwise in the Instructions for
Use, to a maximum layer thickness of 2 mm. Generally, these re commendations apply to situations where the emission
window of the light guide is placed directly over the material to be polymerized. Increasing the distance between the
light source and the material will require the curing time to be extended accordingly. For instance, if the distance to
the material is approx. 8 mm, the effective light output is reduced by approx. 50%. In this case, the recommended
curing time has to be doubled.
1) The information provided herein applies to the 10>9 mm light guide supplied in the delivery form.
2) The information regarding heat development and burn hazards must be taken into consideration (see Safety notes).
12
Start/Stop button
Time selection button
Program selection button
3sCure
(3,000 mW/cm
)
2
Turbo
(2,000 mW/cm
)
2
High Power
(1,200 mW/cm
)
2
PreCure
(950 mW/cm
)
2
Curing times
Polyvision activated
Publicidad
