SICE S 1000 Manual De Instrucciones página 146

5.4.a Automatic functions
WHEEL DIMENSION ACQUISITION
N.B.: before acquiring the wheel dimensions, the
tools must be positioned as explained below:
1. Set the rim diameter using the arrows on the
main screen (Fig. 21) or the
ton on the "automatic mode" screen.
2. Select the disc via the revolver wheel button
then, using the upper carriage command
, position the disc in line with the upper
edge of the rim, as shown in the fi gure (Fig. 21a).
3. Use the lower carriage command
position the lower disc in line with the lower
edge of the rim, as shown in the fi gure (Fig. 21b).
- Press the camera button
facilitate the positioning of the lower bead breaker
disc.
PHASE 1: press the
Once storage is completed, the tool and bead breakers will make a small movement
away from the wheel.
146
or but-
to
(optional) to
icon to store the wheel dimensions.
CAUTION!
21
21a
21b
User manual S 1000