Continuity Test - Keysight U1610A Guia Del Usuario

3 Reverse the polarity of the probes and measure the voltage across the diode
4 See

Continuity Test

Disconnect circuit power and discharge all high voltage capacitors before
WARNING
measuring continuity on circuits or wires to avoid electric shock and damage
to the handheld scope.
The continuity test emits a continuous beep (press
is broken.
To perform the continuity test:
1 Press
Keysight U1610/20A User's Guide
again. Read the voltage reading from the display.
"Relative Measurement"
functions.
to enable the beeper) when a circuit is complete; otherwise the circuit
and use the
Set up the following connections:
Using the Digital Multimeter
and "Restart Measurements"
keys to select the continuity test function.
OFF
(open)
ON
(closed )
4
for the respective
> >
97