Publicidad
Idiomas disponibles
Idiomas disponibles
3
Using the Oscilloscope
Glitch trigger
A glitch is a rapid change in the waveform that is usually narrow as compared to
the waveform. The
narrow pulses.
Source
See
Polarity
Toggle
the glitch you want to capture.
Level
See
Qualifier
The time qualifier sets the oscilloscope to trigger on a channel pattern whose time
duration is:
– less than a time value (<)
– greater than a time value (>)
– within a range of time values (><)
– outside a range of time values (<>)
To select the qualifier:
1 Press
2 Press
Minimum and Maximum values
Press
minimum or maximum time value respectively for the selected qualifier.
56
Peak Detect mode
"Source"
on page 55.
to select the positive (
"Level"
on page 55.
to access more trigger parameters.
repeatedly.
>
can be used to more easily view glitches or
) polarity or negative (
/
and use the
Keysight U1610/20A User's Guide
) polarity for
or
key to set the
Publicidad
