Publicidad
Idiomas disponibles
Idiomas disponibles
1
Getting Started
Compensate the Scope Probe
Perform scope probe compensation whenever you attach a passive scope probe
to any input channel for the first time. This is important to match the probe
characteristic to the handheld scope. A poorly compensated probe can introduce
significant measurement errors.
To adjust the probe compensation for a channel:
1 Connect the passive probe to the channel terminal and the probe contact to
2 Press
3 Press
4 The input signal is 5 Vpp, 1 kHz from the external trigger.
Use a nonmetallic tool to adjust the trimmer capacitor on the probe for the flattest
pulse possible.
28
the external trigger terminal using a BNC adapter as shown below.
, then toggle
a channel.
repeatedly to set the probe attenuation factor.
to turn on the compensation signal for
BNC adapter
Keysight U1610/20A User's Guide
Publicidad
