Keysight U1610A Guia Del Usuario página 120

5 Press
6 Once completed, the handheld scope will automatically restart for the
Self-calibration
Press
page 25).
Antialiasing
Aliasing can occur when the oscilloscope sampling rate is not at least twice as fast
as the highest frequency component in the sampled waveform. When the
antialiasing function is turned on, the handheld scope randomizes the time
between the samples at a low sweep rate. This prevents the high frequency
aliased signals to be misinterpreted as low frequency signals when displayed on
the screen.
Toggle
System Information
Press
Keysight U1610/20A User's Guide
>
the firmware.
firmware updating to take effect.
to perform self-calibration. (See
to turn on/off antialiasing.
to view the current system information of the handheld scope.
Using the System-Related Functions
> >
"Perform Self-Calibration"
6
to start updating
on
115