Publicidad
Idiomas disponibles
Idiomas disponibles
4
Using the Digital Multimeter
2 Read the voltage reading from the display.
3 See
Resistance Measurement
Disconnect power to the device-under-test and discharge all high voltage
WARNING
capacitors to avoid electric shock and damage to the handheld scope or
device-under-test while taking resistance measurement.
Resistance (Ω) is measured by sending a small current out through the test leads
to the device or circuit-under-test.
To measure resistance:
1 Press
94
"Relative
Measurement", "Range", and
respective functions.
and use the
measurement function. Set up the following connections:
"Restart Measurements"
keys to select the resistance
Keysight U1610/20A User's Guide
for the
Publicidad
