Keysight U1610A Guia Del Usuario página 36

Connect the insulation cover over the probe tip when the hook clip is not
WARNING
used to prevent any electrical shock. This also helps to avoid unwanted
interconnection between the two probes when both ground clips are
connected.
Figure 1-8
An example of how a fully isolated input channels handheld scope monitors the
output voltage of a PWM inverter drive and the gate control signals of an
Insulated Gate Bipolar Transistor (IGBT) is shown in
connected to the output voltage of the PWM AC drive and Channel 2 is connected
to the transistor input, where the signals come from the control board. For a
complete floating measurement, the probe reference lead for each channel is
connected to the circuitry.
Figure 1-9
Keysight U1610/20A User's Guide
Insulation cover
Probing the VFD IGBT control signal and IGBT
output
Getting Started
Figure 1-9. Channel 1 is
1
33