7
Operation
7.1
Authorisation
u Authorise (dependent on the configuration).
The following authorisation options are available:
No authorisation (Autostart)
All users can charge.
Authorisation through RFID
Users whose RFID card has been entered in the
whitelist can charge.
u Hold the RFID card in front of the RFID card
reader.
If the vehicle is not connected to the
product within 5 minutes, the authorisation
is reset and the product switches to
Standby mode. The authorisation process
must be repeated.
7.2
Charging the vehicle
WARNING
Risk of injury from using unsuitable aids
If unsuitable aids (e.g. adapter plugs, extension
cables) are used during the charging process, there
is a risk of electric shock or cable fire.
u Use only the charging cable intended for the
vehicle and the product.
Requirement(s):
ü The authorisation process is complete (if neces-
sary).
ü The vehicle and the charging cable are suitable
for Mode 3 charging.
u Unroll the charging cable completely.
u Connect the charging cable to the vehicle.
Selecting the charging mode
1 "3.5 Solar charging modes" [} 7]
2
Fig. 17: Sun button
Press the Sun button (1) to select the charging
mode according to the following diagram.
Standard
Mode
Fig. 18: Switching the charging modes
The set charging mode is indicated by the "Sun" (2)
LED:
Status of "Sun" LED
Off (is not lit)
Lights up
Pulsates
n The Sun button has no function unless
solar charging has been set up.
n Switching from Standard mode, Sunshine
mode or Sunshine+ mode is always pos-
sible (also while charging is in progress).
Charging process does not start
If the charging process does not start, the commu-
nication between the charging point and the
vehicle may be faulty, for example.
u Check the charging plug and the charging
socket for foreign objects and remove if neces-
sary.
u Have the charging cable replaced by a qualified
electrician if necessary.
1
Sunshine
Sunshine+
Mode
Mode
Set charging mode
Standard mode
Sunshine mode
Sunshine+ mode
EN
31