Using The Cooktop; Operation In Case Of Power Failure; Surface Burners - IO Mabe IO7660 Manual De Uso

Using the cooktop

In case of a power failure
In the event of a power failure, the oven is inoperable and no attempt should
be made to operate it. However, the surface burners may be lit with a match.
Using extreme caution, hold a lit match near the ports beneath the surface
burner cap, then slowly turn the knob to the LITE position. Once lit, surface
burners will continue to operate normally.

Surface burners

Lighting a surface burner
WARNING:
operated only when covered by
cookware. Burner flames not covered
by cookware present a risk of fire or
clothing ignition. Never let flames
extend beyond the sides of the
cookware. Failure to comply may
result in serious injury.
Make sure all burners are in their
correct locations and fully assembled
before attempting to operate any
burner.
Select a burner and find its control
knob. Push the knob in and turn it to
the LITE position.
Selecting a flame size
Watch the flame, not the knob, as
you adjust heat. When rapid heating
is desired, the flame size should
match the size of the cookware you
are using. Flames larger than the
bottom of the cookware will not heat
faster and may be hazardous.
Burners should be
You will hear a clicking noise—the
sound of the electric spark igniting
the burner. When one burner is
turned to LITE, all burners will spark.
Sparking will continue as long as the
knob remains at LITE. Once gas is
ignited, turn the knob to adjust the
flame size.
Empuje el mango de control y gire el
mismo hasta la posición LITE.
These flame are too large for the pot
61