VALBERG 15S39 D SAD701T Instrucciones De Uso página 13

B
The top panel of the dishwasher must be removed to fit the appliance under the worktop.
To remove the top panel, remove the screws that hold it in place at the back of the appliance.
Then push the panel 1 cm towards the back and lift it up.
Adjust the feet of the appliance to the slope of the floor (3).
Install your appliance by pushing it underneath the worktop, ensure that it the pipes are not
bent or crushed (4).
WARNING
After removing the top panel of your dishwasher, the
appliance must be placed in a space with the dimensions
shown in the illustration below.
Using the appliance
10 EN