Publicidad
Idiomas disponibles
Idiomas disponibles
B
If the dose of rinse liquid is too high, you may see blueish layers on the glass and dishes.
Filling and adjustment with rinse aid
To fill the rinse aid compartment, open the rinse aid compartment cap.
Fill the container with rinse aid to the MAXIMUM level then close the cap. Ensure that you do
not overfill the rinsing compartment and that you wipe up any spills.
To change the rinse aid level, follow the steps below before turning on the dishwasher:
• Switch on the machine by pressing the Start/Stop button.
• Press the Programme button for at least 5 seconds immediately after the machine has
been switched on.
• Release the programme selection button when "rA" is displayed on the screen.
• The setting of the rinse aid level follows that of the water hardness level. Then the last
setting level is displayed.
• Adjust the level by pressing the programme selection button.
• Turn off the machine to save the settings made.
The factory setting is "4".
If the dishes do not dry properly or are stained, increase the level.
If blue stains form on your dishes, lower the level.
Level
1
2
3
2 doses have been distributed
4
3 doses have been distributed
5
4 doses have been distributed
Using the appliance
Dose of brightener
Rinse aid not released
1 dose is distributed
15
Indicator
r1 appears on the screen.
r2 appears on the screen.
r3 appears on the screen.
r4 appears on the screen.
r5 appears on the screen.
EN
Publicidad
