Publicidad
Idiomas disponibles
Idiomas disponibles
C
Useful information
Troubleshooting
PROBLEM
The programme
does not start.
Water remains
i n s i d e
t h e
appliance.
The machine stops
during the wash.
If shaking and
banging noises
are heard during
washing.
POSSIBLE CAUSE
Your dishwasher is not
plugged in.
Your dishwasher is not
switched on.
Blown fuse.
Water inlet valve closed.
The door of your dishwasher
is open.
The water supply hose and
the filters of the appliance
are blocked.
The water drain hose is
blocked or pinched (bent).
The filters are clogged.
The programme is not yet
complete.
Power failure.
Water supply failure.
The spray arm is hitting the
dishes in the lower rack.
36
TROUBLESHOOTING
Plug in your dishwasher.
Switch on the dishwasher by pressing
the Start/Stop button.
Check your circuit breaker.
Open the water supply tap.
Close the dishwasher door.
Check the water supply hose and filters
of the appliance and make sure they are
not blocked.
Check the drain hose, then clean or
unfold it.
Clean the filters.
Wait for the end of the programme.
Check the mains supply.
Check the tap.
Move or remove objects that are
blocking the spray arm.
EN
Publicidad
