Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Installing the dishwasher
Positioning the dishwasher
When installing your dishwasher, make sure you choose a place where you can easily load
and unload your dishes.
Do not install your dishwasher in a place where the ambient temperature may drop below 5°C.
Sub-zero temperatures may damage the hoses or cause the electronic board to malfunction.
Before positioning the dishwasher, remove it from its packaging, and observe the warnings
on the packaging.
Position the dishwasher close to a water supply and a water drain. You must install your
dishwasher so that the connections are not altered once they have been made.
Do not pull the dishwasher by the door or control panel to move it.
Ensure that you leave space around the dishwasher so that it can be moved easily during
cleaning.
Take care not to jam the water inlet and drain hoses when positioning the dishwasher.
Ensure that you do not trap the electric cable under the dishwasher.
Adjust the legs of the dishwasher so that it is level and stable. It is essential to position the
dishwasher correctly for the door to open and close properly.
If your dishwasher door does not close properly, check that the dishwasher is level and stable
on the floor; if not, position the dishwasher in a stable position using the adjustable legs.
Water connection
Check that the water supply is suitable to install a dishwasher. We recommend that you
install a filter after your water meter to prevent residues (sand, clay, rust, etc.) that may be
brought into the water system or the indoor plumbing installation which could cause damage
to the dishwasher and inconveniences, such as yellowing of the dishes or the formation of
deposits after washing.
5
EN
Publicidad
