Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Alarm check (depending on the model)
To change the alarm sound level, proceed as follows:
Open the door and press the Option (6) and Select (7) buttons simultaneously for 3 seconds.
When the sound setting is recognised, the alarm lets out a long tone and the unit displays
the last set level from "S0" to "S3 ».
To decrease the sound level, press the Select button (7). To increase the sound level,
press the Options button (6).
To save the selected sound level, turn off the appliance. The S0 level means that all sounds
are disabled. The factory setting is S3.
Energy saving mode
To activate or deactivate the power saving mode, follow these steps:
Open the door and press the Programme (2) and Option (6) buttons simultaneously for
3 seconds.
After 3 seconds, the unit displays the last setting, "IL1" or "IL0 ».
When the power save mode is activated, "IL1" is displayed. In this mode, the interior light
(if available) is switched off 2 minutes after the door is opened, and the unit is switched off
after 15 minutes of inactivity to save energy.
When the power save mode is activated, "IL0" is displayed. If the energy saving mode is
disabled, the interior lights will be on as long as the door is open, and the appliance will
always be on unless it is switched off by the user.
To save the selected setting, turn off the appliance.
In factory setting, the power save mode is activated.
30
EN
Publicidad
