clage DSX Touch Instrucciones De Uso página 36

DSX Touch
2. How to use
EN
Thermal treatment
With this function, you can support a thermal treatment of your appliance and the fol-
lowing pipeline, including the tap. A thermal disinfection according to the accepted
rules of technology is not replaced.
• Tap OK to start the treatment cycle and the outlet temperature is set to 70 °C. The
function is disabled if the appliance is connected to a shower.
• Draw hot water for at least three minutes to heat the pipes to the tap completely.
• A change of the temperature or 30 sec without water flow terminates the treat-
ment cycle.
• The number as well as the accumulated duration and the water amount of all ther-
mal treatments will be saved.
Notes:
Ensure that no one can be injured by the elevated temperatures and that the installa-
tion can withstand the strain.
The exiting water and the tap become very hot! The water steam should not be
inhaled.
Measured value / statistics
The energy and usage data of the unit are displayed and the consumption values are
statistically evaluated. You have access to the following areas:
Statistics
The consumption of electricity and water is displayed over different time periods.
The consumption of electricity and water is displayed over a period of 14 days. The
lines indicate the average. By tapping on a day, the respective daily values can be read.
Notes: The consumption and usage data are not suitable for billing purposes.
Power consumption in kW
Current power consumption of the unit.
Percentage power
Percentage utilisation of the unit.
Flow rate
The measured flow rate.
Outlet temperature
Measured hot water temperature.
Supply temperature
Measured cold water temperature.
Control value
Optimally a value of 40 - 60.
36