clage DSX Touch Instrucciones De Uso página 38

DSX Touch
2. How to use
EN
Flow rate in main display
The flow rate display in the main display can be activated / deactivated here.
Various locks
Secure your settings against unwanted changes.
By tapping on the in the main control, you can also access this selection menu.
Lock nothing: Cancels all locks.
Water on display: Locks the touch control. A prompt appears when you touch the
control panel. Tap or swipe over items 1-4 to unlock the control panel. In the centre, a
timer shows the remaining time for the entry.
Parameter lock: Menus and information can be viewed and opened but only changed
with the correct PIN.
Menu lock: The main menu can only be opened with the correct PIN.
Operation lock: All inputs and displays are locked and can only be opened or changed
after entering the PIN.
Note: The operation lock can only be deactivated with the correct PIN via "Lock noth-
ing". If you have forgotten your PIN, please contact customer service.
Enter PIN: Up to 8 digits from 0 to 9 can be selected via the keypad. If you have
selected four digits, confirm by tapping
locking options: parameter, menu or operation. To activate, the PIN must be entered
and confirmed again for security.
Legal, Service, Documentation
Here you will find the imprint, software licences as well as QR codes with links to cus-
tomer service, product registration and the online manual.
Resources / Saving
Here the parameters for the costs in the consumption statistics can be set and the
flow and temperature can be limited.
Currency
Selection of a currency symbol.
Water price (€/m³)
Specify the water price of the own water supplier.
Electricity price (€/kWh)
Enter the electricity price of your own electricity supplier.
Maximum flow rate
Here you can set the behaviour of the flow limitation.
Setting options:
MAX No flow control (motor valve deactivated)
Auto Automatic control, i.e. flow limited so that the set desired temperature is
reached
e.g. 8,0 Flow limitation to a freely selectable value between 4.5 and 25 l/min
Maximum temperature
The temperature limitation can be activated / deactivated in this menu and the maxi-
mum outlet temperature can be limited to any value within the temperature setting
range.
Note: If the instantaneous water heater supplies a shower, the maximum temperature
was limited to 55 °C during installation of the unit and the function was disabled.
38
. You can then choose between the three