Weh Proxeo PF-60 Manual De Uso Y Mantenimiento página 45

7.2 Maintenance of the Core Unit
Following are the main operations to be carried out on the device core unit.
7.2.1 Routine Maintenance of the Core Unit
In addition to the cleaning and sterilisation described in
out at first use and at every subsequent use, the following operations should also be regularly
performed:
1. As explained in Chapter 5.3 on page
18 , empty and clean the powder
container each time the powder
is changed and before cleaning,
disinfection, and sterilisation.
7.2.2 Clogged Core Unit
If the device core unit is clogged, check and carry out the following procedures.
If the air passage of the air polisher de-
vice is clogged, use the supplied cleaning
needle to free the channel of any powder
residue.
NOTE: The duct and powder chamber
must be properly dried with a clean
cloth and compressed air before reuse.
Remember that too much moisture or
liquid inside the powder chamber may
block the device.
MAINTENANCE
Chapter 6 on page 21
2. Each time the polisher nozzle is
removed, use the syringe to blow
compressed air into the central duct
of the connector of the nozzle on the
device.
1
, to be carried
39