Delta 26-2312 Manual De Instrucciones página 19

THROAT PLATE
See Figures 20 and 21.
ONLY use DELTA
Using non-authorized parts can results in damage to your
machine and serious personal injury.
In the event that your throat plate needs to be replaced for
any reason, follow these instructions.
1.
Using a T20 Torx driver OR a flat head screwdriver,
remove the six screws
plate. Remove the throat plate off the work table.
NOTE: To allow for clearance to the 2 rear screws, the
worktable will need to be mitered to the left and right.
2.
Replace the throat plate ONLY using a DELTA
authorized service part.
3.
Re-tighten the six screws
plate.
ADJUSTMENTS
authorized service parts.
®
which secure the throat
A
which secure the throat
A
A
®
19
Figure 20
Figure 21