Delta 26-2312 Manual De Instrucciones página 5

KNOW YOUR COMPOUND MITER SAW
1.
On/Off Switch and Lockout Hole: This saw is
activated by an easy to use, hand operated, power
on/off switch. When not in use the saw should be
disconnected from the power supply and locked using a
padlock inserted through the lockout hole located on the
power on/off switch.
2.
Trigger Lock: This switch helps prevent accidental
start, must be engaged along with power switch to
operate machine.
3.
Shadow Guide ON/OFF Switch: This switch turns
on/off the shadow line guide feature.
4.
Dust Bag: The dust bag collects and contains the saw
dust during the cutting operations.
5.
Depth Stop Screw/Depth Stop Plate: The screw/
depth stop plate can be used to make a non-through
cut. The screw/depth stop screw allows the depth of cut
to be adjusted.
6.
Bevel Scale and Indicator: These indicate the
current blade bevel position and are adjustable; This
allows for fine calibration of the blade alignment.
7.
Sliding Fence: The fence supports the workpiece when
making all cuts. The sliding fences are adjustable.
8.
Base: Supports the tool and features mounting holes.
9.
Throat Plate (Kerf Plate): The throat plate supports
the workpiece from underneath, on both sides of the
blade, to minimize workpiece tear out.
10.
Work Table: The die-cast aluminum work table
provides a level and sturdy work surface.
11.
Clamp: The vertical work clamp helps to position and
secure the workpiece to the work table. This provides
for safer operation and more accurate cuts.
12.
Blade: A 12 inch blade is included with the compound
miter saw.
13.
Lower Guard: The lower blade guard is made of
shock-resistant, see-through plastic that provides
protection from the blade.
14.
Upper Guard: Cast aluminum protects user from blade.
15.
Spindle Lock: Engage the spindle lock when changing
the blade in order to hold the blade into position while
you loosen the blade bolt.
16.
Back Fence Supports: These provide workpiece
support and additional cut capacity when the sliding
fences are removed.
17.
T30 Torx/Blade Wrench: This wrench features a L
key Torx head with an Allen Wrench and should be used
when removing, installing, or changing the blade.
FEATURES
18.
Motor End Cap: This provides access to your saw's
motor's Brush Caps/Carbon brushes, in the event they
need to be inspected or replaced.
19.
Carrying Handle: Use this to transport your saw.
Make sure the Slide Lock Lever and Head Lock Pin are
engaged before transporting.
20.
Head Lock Pin: This allows the saw head to be locked
into the full down position, for transportation.
21.
Bevel Detent Latch (2): This latch engages/
disengages the bevel detent pin which allows the bevel
angle to be locked into one of the detent positions.
22.
Mounting Holes (4): Enables you to securely mount
the tool to a stable surface.
23.
Miter Scale and Indicator: These indicate the current
blade miter position and are adjustable; This allows for
fine calibration of the blade alignment.
24.
Miter Detent Override Button: This button holds the
miter detent into the unlocked position which allows
free movement of the miter arm without holding the
miter detent lock/unlock button.
25.
Miter Lock Knob: This knob locks the blade miter
angle securely into place. ALWAYS lock before making
any cuts.
26.
Bevel Lock/Unlock Handle: This handle locks the
blade bevel angle securely into place. ALWAYS lock
before making any cuts.
27.
Miter Detent Lock/Unlock Button: This button
allows you to release the miter arm from the positive
stops and freely rotate the miter arm/work table.
28.
Support Extension (2): These act as table extensions
to help support longer work pieces.
29.
Glide Adjustment: This adjust the friction for the front
to back, saw head siding movement.
30.
Baseboard Position Notch: This notch, when
engaged, allows this saw to operate like a chop saw.
This eliminates the sliding ability, but still allows the but
still allows a precise, stable cut.
31.
Slide Lock Lever: This allows the saw head to
be locked into the fully retracted position, for
transportation.
32.
E-Brake (Not Shown): This brake will slow your blade
down quickly when the power switch is disengaged
(release hand from power switch).
5