Delta 26-2312 Manual De Instrucciones página 21

MOUNTING AND TRANSPORTATION
MOUNTING SAW TO STABLE SURFACE
See Figure 24.
To ensure safe and accurate operation, this
saw should be mounted to a stable and level surface such as a
sturdy workbench. To mount the tool to a stable surface, do
the following:
1.
Locate the four mounting holes
saw.
2.
Secure the tool to the mounting surface using 3/8 inch
diameter machine bolts, lock washers, and hex nuts
(not included). Make sure the bolts are long enough to
accommodate the saw base, lock washers, hex nuts,
and the thickness of the workbench.
3.
Tighten all four bolts securely.
4.
Check to make sure that the saw is secure before
operation.
in the base of the
F22
21
F22
Figure 24
F22