Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING AND TRANSPORTATION
Before moving/transporting your saw, it is important to make sure all of the following steps have been followed to
ensure a safe condition for transportation. Failure to do so can result in serious personal injury.
ALWAYS turn the power off and unplug saw before transporting.
•
ALWAYS secure power cord to avoid any snags or hang ups during transportation.
•
ALWAYS lift using the strength of your legs to lift saw; never use your back muscles to lift saw.
•
•
DO NOT use power On/Off switch handle or power cord to lift your saw.
•
ALWAYS place the saw onto a stable and level surface with clearance for handling and maneuvering.
PREPARATIONS FOR TRANSPORTATION
SAW HEAD LOCK PIN
See Figure 22.
ALWAYS lock saw head in the down position before
transporting saw. To engage saw head lock pin
head to the down position then push-in lock pin.
Saw Head lock pin is for storage and
transport ONLY. This saw should NEVER be locked in the
down position while making cuts.
SLIDE LOCK LEVER
See Figure 22.
ALWAYS engage the slide lock lever
this saw. To engage slide lock lever: Push saw head to the fully
retracted position then swing the slide lock lever down.
CARRY HANDLE
See Figure 23.
For transportation, use the included carry handle
also lift using the cast-in handle cut-outs
the saw base. DO NOT lift or carry using the Support Extensions.
: Push saw
F20
before transporting
F31
. You may
F19
on both sides of
A
F20
Figure 22
F19
Figure 23
20
F31
A
Publicidad
