Publicidad
Idiomas disponibles
Idiomas disponibles
AC Voltage
The AC Voltage measurement option will only be available when Scan is selected as the acquisition mode.
This section describes how to configure the selected channel for AC voltage measurements from the front panel.
1. Connect the AC voltage source to the module's screw terminals.
2. Press [Channel] > Measure, and select ACV from the selection menu.
3. Press Range and use the knob or the front panel arrow keys to specify the measurement range. Auto
(autorange) automatically selects the range for the measurement based on the input. Autoranging is con-
venient, but it results in slower measurements than using a manual range. Autoranging goes up a range at
120% of the present range, and down a range below 10% of the present range.
Keysight DAQ970A/DAQ973A User's Guide
3 Features and Functions
119
Publicidad
