Publicidad
Idiomas disponibles
Idiomas disponibles
Firmware Update
Do not turn off the instrument during the update.
1. Press [Home] > Help > About to determine the firmware revision that is currently installed.
2. Go to
www.keysight.com/find/DAQ970Afirmware
installed on your instrument, there is no need to continue with this procedure. Otherwise, download the firm-
ware update utility and a ZIP file of the firmware. Detailed firmware instructions are in the Firmware Update Util-
ity Instructions located on the download page.
3. Unzip the ZIP file and use the firmware update utility to prepare a USB drive with the updated firmware.
4. Attach the USB drive to the instrument front panel and press [Utility] > Admin > Firmware Update to update the
firmware. If Secure mode is enabled, unlock the instrument with the security code before installing
firmware.
Important: In order to update the instrument firmware from remote, the model number in the *IDN? response must
match the actual instrument model number. If you have changed the instrument's *IDN? response to another
instrument, when attempting to update the firmware from remote, you will see this error: "The instrument is not
supported by this firmware file". To update the firmware, either update using the front panel procedure or, from
remote, use SYSTem:PERSona:MODel to set the *IDN? to match the actual model number, update the firmware, and
then use SYSTem:PERSona:MODel again to set the *IDN? response to the other model number.
Keysight DAQ970A/DAQ973A User's Guide
to find the latest firmware revision. If this matches the revision
1 Introduction to the Instrument
33
Publicidad
