[Module] Menu; Scan List - Keysight DAQ970A Guia Del Usuario

3 Features and Functions

[Module] Menu

Press the [Module] key to access the Module menu. In the Module page, you can view the instrument's scan list,
reset the modules, rename the label of a module, and check the relay cycles of the internal DMM and the plug-in
modules.

Scan List

The options is only available when Scan is selected as the data acquisition mode.
Press the Scan List softkey to view the available channels on the module that are included in the scan list (Scan
Status = ON). Press Remove From Scan softkey to turn off measurements on all channels on the module, and
remove the channels from the scan list. If the channel list is longer than one page, press the up/down arrow keys on
the front panel to scroll through the other pages.
Keysight DAQ970A/DAQ973A User's Guide 177