Publicidad
Idiomas disponibles
Idiomas disponibles
3 Features and Functions
All/Detail softkey
Press the All/Detail softkey to toggle between how the trend graph is shown on the display.
In DMM Digitize data acquisition mode, the All/Detail softkey will only be available when there is a minimum of
401 digitized samples.
All view
When All is selected, the instrument will display all the digitized samples on the screen. This allows you to have an
overview of the all the digitized samples. In the All view, there will also be a window which you can pan across the
digitized samples to select a portion of the digitized samples, up to 400,000 samples (maximum window size), to be
displayed on the screen in the Detail view.
In the image shown below is an example where 500,000 samples were digitized and in the All view, all 500,000
samples are shown on the screen. The window encloses 400,000 samples (Readings #50,000 to #450,000) where
the center is at reading #250,000. When you switch to Detail view, only readings #50,000 to #450,000 will be shown
on the screen.
Detail view
The Detail view helps to isolate points of interest from the entire set of digitized samples to ease the post processing
of the points of interest. When Detail view is selected, the instrument will display up to 400,000 samples on the
screen based on the samples which are within the window in the All view.
84
Keysight DAQ970A/DAQ973A User's Guide
Publicidad
