Publicidad
Idiomas disponibles
Idiomas disponibles
3 Features and Functions
Settings in Detail view
Measure Settings
Press the Measure Settings softkey to configure the position of markers and set the mode of data analysis.
The Measure Settings softkey will only be available once a minimum of 256 samples have been digitized.
Softkey
Analysis
Quick M.
Statistics
Add to List
Remove All
86
Description
The Quick M. (Quick Measurement) option allows you to add up to four quick measurement modes to be
displayed on the screen.
To select quick measurement modes for analysis, press
arrow keys to browse through the different options. Once you have selected your desired quick
measurement option, press the
displayed.
The quick measurement options available are:
– Rms: Root mean square
– DCycle: Duty cycle
– PWidth: Positive width
– NWidth: Negative width
– RTime: Rising time
– FTime: Falling time
– Period
– Freq: Frequency
Press
Analysis > Statistics to display statistics data such as Minimum, Maximum, Average and Standard
Deviation) on the screen.
Press the
Add to List softkey to add the selected quick measurement mode to be displayed on the screen.
You may add up to four quick measurement modes to be displayed. Do note that when you add more than
four measurement modes, the most recent measurement mode will replace the first measurement mode
which was added (First-in, first-out behavior).
Press the
Remove All softkey to remove all the quick measurement modes displayed on the screen.
Analysis > Quick M. . Next, use the knob or the
Add to List softkey to add it into the list of quick measurement that will be
Keysight DAQ970A/DAQ973A User's Guide
Publicidad
