Keysight DAQ970A Guia Del Usuario página 22

1 Introduction to the Instrument
To enable DHCP:
Step Front panel
1 Press [Home] > User Settings > I/O > LAN Settings > Modify Settings.
Set the first softkey to
2 If you change this parameter, you must press
[Done] > [Apply Changes] for the change to take effect.
To disable DHCP:
Step Front panel
1 Press [Home] > User Settings > I/O > LAN Settings > Modify Settings.
Set the first softkey to
2 If you change this parameter, you must press
[Done] > [Apply Changes] for the change to take effect.
22
DHCP .
Manual .
Remote interface
SYSTem:COMMunicate:LAN:DHCP ON
SYSTem:COMMunicate:LAN:UPDate
Remote interface
SYSTem:COMMunicate:LAN:DHCP OFF
SYSTem:COMMunicate:LAN:UPDate
Keysight DAQ970A/DAQ973A User's Guide