VM Motori R754EU6E Manual De Instrucciones Para El Uso página 83

Type of injection
GB
Type of fuel
Total capacity of engine internal
cooling circuit
Total capacity of engine cooling
circuit installed on the vehicle
Coolant
DEF fluid
DEF fluid tank capacity
DEF fluid tank capacity supplied
by the manufacturer of the vehicle
in wich the engine is installed
English
Fuel supply circuit
Common Rail direct injection with high pressure injection pump
The diesel fuel to be used must comply to the UNI EN590 standard.
(maximum bio-diesel content 7%).
HVO fuels complying with EN15940* standard are compatible with
the engines R754EU6E without any special maintenance (standard
maintenance to be applied).
(*) EN15940 : Paraffinic diesel fuel from synthesis or
The use of fuels with specifications other than those
indicated is forbidden.
Cooling circuit
It varies according to the configuration of the cooling circuit
litres
of the vehicle where the engine is installed
Respect the instructions of the manufacturer of the vehicle
-
in which the engine is installed
Organic Acid Technology (OAT coolant)
The coolant based on ethylene glycol and demineralized
water, also known as "antifreeze", is used to protect the
It also contains chemical additives that protect against
It is required that the coolant conforms to
-
ASTM D 3306 Type 3 standards.
The use of the following refrigerant fluids is recommended:
Petronas Paraflu UP Ready (ASTM D 3306 Type 3)
Fuchs Maintain Fricofin LL50 (ASTM D 3306 Type 3).
NOTE: Only ready-to-use refrigerant fluids are permitted.
Concentrated fluids to be mixed with water are not permitted.
Exhaust circuit
IMPORTANT: it is forbidden the use of solutions with
-
Fluid handling in accordance with specifications
litres
Follow the instructions of the manufacturer of the vehicle in
litres
14
hydrotreatment.
IMPORTANT:
coolant from freezing.
corrosion.
or
different specifications .
ISO 22241 - 1 - 2 - 3 - 4
14 (including reserve)
wich the engine is installed
R754EU6E
42432110F