Publicidad
20
CASSETTE CARE
CASSETTE INSERTION
ae
1 Insert a power source.
2 Press and slide the cassette eject button.
The cassette holder will open.
3 Insert a cassette with the window facing
outside.
4 Close the cassette holder.
CASSETTE EJECTION
1 Make sure that a power source is inserted.
2 Press and slide the cassette eject button.
3 Take out the cassette and close the cassette
holder.
TO PREVENT ACCIDENTAL ERASURE [G2]
Slide out the tab on the casseite so that it
covers the opening. (A red mark will appear.)
To re-record on the cassette, slide the tab in to
uncover the opening.
Notes
* Don't press the upper lid of the cassette
compartment forcibly when it is moving.
e Never insert anything in the small holes on the
rear of the cassette. These holes are used to
sense the kind of tape, thickness of tape, or if the
tab is out or in, etc.
* To record from the beginning of the tape, run the
video camera recorder for about 15 seconds at the
beginning of a cassette before recording. It will
avoid missing the starting point during playback
on a video cassette recorder.
Publicidad
