Publicidad
[3] Connecting a TV connected to another VCR
without an input selector. [5-4]
Connect the supplied RFU adaptor RFU-
88UC to the CCD-Va/v30. [S:1]
1 Connect the RFU-88UC, TV, and the VCR
to the antenna selector (supplied with the
RFU-88UC) using the supplied 75-ohm
coaxial cables.
2 Set the RF unit selector to 3CH or 4CH,
whichever channel is not active In your
area.
3 Set the selector switch on the antenna
selector to VTR for viewing a playback
picture.
4 Select the same channel on the TV as on
the RFU-88UC.
[4] Connecting a TV connected to another VCR
with an input selector
Use the optional connecting cord VMC-
Input selector > LINE
TV/VTR selector - VTR
3CH
4CH
err'
*
-CCD-V3/V30
Publicidad
