Publicidad
Idiomas disponibles
Idiomas disponibles
EN
11 ALARMS - ANOMALIES - USEFUL TIPS
Anomalies, causes and possible remedies
Anomaly
Ignition difficulties
Presence of smoke and soot in
the room
The glass dirties very quickly
Condensate build-up
Presence of water in the firebox
and in the ash tray
Difficulty heating the plate and
the oven
26
Causes
Insufficient combustion air
Non-conforming quality, size and quantity of fuel
Insufficient draught
External air intake not present of with insufficient
cross-sectional size
Fume discharge system clogged or not made
correctly
Loss of smoke from piping
Insufficient draught
Fume discharge system clogged or not made
correctly
Non-conforming quality, size and quantity of fuel
Insufficient draught
Fume discharge system clogged or not made
correctly
Slow combustion and thus excessively low fume
temperature
Fume discharge system and condensate collection
chamber not made correctly
Fume discharge system not made correctly
Insufficient combustion air
Non-conforming quality, size and quantity of fuel
Excessive draught
Possible solution
Increase the combustion air intake (see "Adjusting
the combustion air").
Use fuel conforming to the indications given under
the chapter "Fuel".
Open the internal fume deflector, the fume damper
and the combustion air primary damper.
Clean the brazier (see "Cleaning the brazier").
Clean the ash tray (see "Cleaning the ash tray").
Clean the fume passage (see "Cleaning the
combustion chamber").
Contact the authorised KLOVER Technical
Assistance Centre.
Contact the authorised KLOVER Technical
Assistance Centre.
Check the tightness of the fume pipe.
Adjust the fume damper.
Clean the brazier (see "Cleaning the brazier").
Clean the ash tray (see "Cleaning the ash tray").
Clean the fume passage (see "Cleaning the
combustion chamber").
Contact the authorised KLOVER Technical
Assistance Centre.
Use fuel conforming to the indications given under
the chapter "Fuel".
Adjust the fume damper.
Clean the brazier (see "Cleaning the brazier").
Clean the ash tray (see "Cleaning the ash tray").
Clean the fume passage (see "Cleaning the
combustion chamber").
Contact the authorised KLOVER Technical
Assistance Centre.
Increase the combustion air intake (see "Adjusting
the combustion air").
Use smaller-size and more seasoned wood (see
"Fuel").
Contact the authorised KLOVER Technical
Assistance Centre.
Contact the authorised KLOVER Technical
Assistance Centre.
Increase the combustion air intake (see "Adjusting
the combustion air").
Use fuel conforming to the indications given under
the chapter "Fuel".
Adjust the fume damper and the internal fume
deflector
CS.ST90.IST-1_EN_Rev. 0.0_07-23
MAINTENANCE
Publicidad
