SKYLOTEC SKYVEST Instrucciones De Uso página 10

Idiomas disponibles

Control module with inflator

USB cap and connector

3.) WARNINGS AND PROPER USE

MAT-BA-0229-03_20240305.indd 10

The SKYVEST cannot prevent a fall. Every fall always means a

risk of injury or death, with or without the SKYVEST.

Wearing the SKYVEST must not increase your willingness to take

risks in any way.

The function and mode of action of the SKYVEST is limited exclu-

sively to reducing the risk of injury.

Check your SKYVEST for damage and function before each use.

There must be no visible tears or holes in the airbag.

Do not bring the SKYVEST into contact with sharp objects such as

pens, knives, nails, screws, etc.

Do not sew or attach anything to the SKYVEST, as this may da-

mage the airbag.

https://www.skylotec.com/eu_de/SKYVEST/

Here you can find a video with instructions, among other things.

The SKYVEST requires careful handling and an exact check of its

operational readiness before each use.

Only use the original inflator specified by Skylotec as well as origi-

nal accessories and spare parts for the SKYVEST and its airbag

system.

The system is only functional if a full original inflator is used.

Do not attempt to dismantle the inflator into individual parts. Any

tampering with the inflator can cause it to deploy, posing a serious

risk of injury, even to bystanders! The black protective cap must

always be in place when the inflator is not fitted.

Protective cap, pull-off direction

26.03.2024 11:09:09

Opus 2.0