Changing The Protection Grids; Changing The Protection Grid At The Back - Vorwerk Thermomix TM5 Manual De Instrucciones

CHanGInG THE
pROTECTIOn GRID
Accessory in selected countries

Changing the protection grid at the back

Disconnect the Thermomix
by lifting it from the clips at the recessed grip 2 . You will now see the back
of the Thermomix with the ventilation slits 3 . Take the protection grid
®
for the back 4 and insert it. It fits snugly over the ventilation slits 5 . The
ventilation grille can now be reattached. Carefully press it into the clips
until it locks entirely in place. Never operate your Thermomix
ventilation grille 6 . Check the protection grids for stains every time you
clean your Thermomix from the outside.
®
2
5
from the mains. Remove the ventilation grille
®
3
6
without the
®
4
Changing the protection grid 49