Publicidad
Idiomas disponibles
Idiomas disponibles
3 Overview
8 Guide bar
The guide bar supports and guides the saw
chain.
9 Saw chain
The saw chain cuts the wood.
10 Limit stop (included in the scope of delivery
depending on the market)
Holds the pole pruner against the wood while
cutting.
11 Chain sprocket cover
Covers the chain sprocket and secures the
guide bar to the pole pruner.
12 Nut
The nut secures the chain sprocket cover to
the pole pruner.
13 Gauge bar
The saw chain can be positioned precisely
using the gauge bar.
14 Chain scabbard
The chain scabbard protects against contact
with the saw chain.
15 Battery
Supplies power to the pole pruner.
16 LEDs
The LEDs indicate the state of charge of the
battery and any faults.
17 Button
The pushbutton activates the LEDs on the
battery. The pushbutton activates and deacti‐
vates the Bluetooth® interface (if available).
18 "BLUETOOTH
®
" LED (only for batteries with
)
The LED indicates the activation and deacti‐
vation of the Bluetooth® interface.
19 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
20 Battery compartment
The battery compartment holds the battery.
3
21 Cover
The cover is the placeholder for a Smart Con‐
nector 2 A.
22 Control handle
For holding and controlling the pole pruner.
23 Trigger lockout
The trigger lockout unlocks the trigger.
3
The cover is part of the motor housing. Only remove the cover to install a Smart Connector 2 A and
store it safely for later re-installation. Always use the pole pruner with the cover or Smart Connector 2
A installed.
0458-038-9802-A
24 Release slide
The release slide is used to switch on the
pole pruner.
25 LED
The LED indicates the status of the pole pru‐
ner.
26 Trigger
Switches the pole pruner on and off.
27 Air filter
The air filter filters the air entering the engine.
28 Base
The machine support is used to deposit the
pole pruner on the ground.
# Rating plate with machine number
3.2
STIHL Pole Pruner HTA 160.0
and battery
1
#
18
19
20
21
22
23
28
27
26
1 Handle hose
For holding and controlling the pole pruner.
2 Shaft
The shaft connects all components.
English
4 5
6
7
8
12
11
9
10
2
3
13
17
24
14
25
16
15
#
35
Publicidad
