Stihl HTA 150.0 Manual De Instrucciones página 58

English
– Sound power level L
ance with IEC 62841-4-10 for 3/8" P:
101 dB(A)
– Sound power level L
ance with IEC 62841-4-10 for 1/4" P: 97 dB(A)
Shaft fully compressed:
– Vibration value a
hv
with IEC 62841-4-10
– Control handle: 5.1 m/s².
– Handle hose: 4.3 m/s²
Shaft fully extended:
– Vibration value a
hv
with IEC 62841-4-10
– Control handle: 5.6 m/s².
– Handle hose: 4.1 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
21 Bar and Chain Combinations
21.1 STIHL Pole Pruner HTA 150.0 and HTA 160.0
Pitch Drive link
gauge/groove
width
3/8" P 1.1 mm
1/4" P 1.1 mm
The cutting length of a guide bar depends on the pole pruner being used and the saw chain that is
mounted. The actual cutting length of a guide bar may be less than the specified length.
22 Combinations of Carrying
Systems
22.1 Combinations of carrying sys‐
tems
The pole pruner may only be used in combina‐
tion with a carrying system. Approved carrying
systems are listed in this user manual:
Shoulder strap
58
measured in accord‐
wA
measured in accord‐
wA
measured in accordance
measured in accordance
Length Guide bar
Rollomatic E /
25 cm
Rollomatic E Mini /
30 cm
Rolloma‐
tic E Mini light /
Light P01
Rollomatic E /
35 cm
Rollomatic E Mini /
30 cm
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
load. The actual vibration load has to be estima‐
ted. The times can be taken into account in the
estimate when the electric power tool is switched
off and also when it is switched on but running
without any load.
For information on compliance with the Physical
Agents (Vibration) Directive 2002/44/EC, see
www.stihl.com/vib.
20.10 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Number of
teeth, spro‐
cket nose
7
Light 04
Light 01
7
7
Light 04
8
Light 01
ADVANCE X-Flex hip strap with
ADVANCE X-TREEm HT forestry har‐
ness, in conjunction with the HT Flex
strap.
Full harness
Battery belt with attached "AP belt bag
with connecting cable" together with
the shoulder strap
Battery belt with strap and attached
"AP belt bag with connecting cable"
together with the support cushion
21 Bar and Chain Combinations
Number of Saw chain
drive links
39
61 PMM3 (Type
44
3610)
50
71 PM3 (Type
64
3670)
0458-038-9802-A