Stihl HTA 150.0 Manual De Instrucciones página 45

7 Activating and Deactivating Bluetooth® Radio Interface
7 Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH " LED next to the
lights up blue for approximately 3 seconds.
®
The Bluetooth radio interface on the battery
is activated.
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH " LED next to the
lights up blue six times.
®
The Bluetooth radio interface on the battery
is deactivated.
8 Assembling the Pole Pru‐
ner
8.1 Assembling the pole pruner
► Switch off the pole pruner and remove the bat‐
tery.
2
b
► Remove the protective cap (1).
► Adjust the shaft length to a = 10 cm
(HTA 160.0)
► Mark b = 6 cm on the shaft (2).
4
90°
► Align the collet (4) (HTA 160.0) and transmis‐
sion (3) as shown.
0458-038-9802-A
Radio
®
®
radio interface:
symbol
®
radio interface:
symbol
1
a
3
5
3
90°
► Slide the transmission (3) onto the shaft (2) up
to mark b.
► Tighten the screws (5) firmly.
6
7
®
► If you cannot push the transmission (3) onto
the shaft (2) up to mark b:
► Rotate the nut (7) counterclockwise until the
chain sprocket cover (6) can be removed.
► Remove the chain sprocket cover (6).
► Turn the chain sprocket (8) and push the
transmission (3) onto shaft (2) up to mark b.
► Fit the chain sprocket cover (6) so that it is
flush with the pole pruner.
► Fit the nut (7) and tighten it down firmly.
HTA 160.0
► Undo the screws (9).
► Pull out the protective tube (10).
► Remove the protective cap (11).
► Turn the shaft (2) and press it in the direction
of the control handle (12) until the distance
c = 2 cm.
8
9
10
11
12
2
c
English
45