Publicidad
Idiomas disponibles
Idiomas disponibles
How
to Set the
Oven
for
Cleaning
Quick Reminder:
1. Latch the door.
2. Turn the Oven Set knob to CLEAN_
If the oven is too hot and you start
to set a clean cycle,
you will not be able to slide the latch.
Allow additional
time for cooling
before you try to set
the cycle.
1. Follow
directions
to prepare
the oven for cleaning.
2. Slide the latch handle
to the
right as far as it will go.
Never force the latch
handle.
Forcing
the handle
I1|111_
will damage
the door lock
mechanism.
3. Turn the Oven Set knob to CLEAN° The CLEAN,
AUTOMATIC OVEN, OVEN ON and COOK
TIME ON/OFF lights will glow.
NOTE:
If you turn
the Oven
Set knob
before
you slide the latch, the CLEAN
light wilt flash.
Slide the latch to the right.
Clean
cycle time is normally
4 hours
and
20 minutes.
On some models
you can change
the
Clean Time
to anywhere
between
3 hours
and 5 hours,
and 59 minutes,
depending
on how dirty your
oven is.
You have one minute
to change
your Clean
Time.
Use the HOUR
and MIN.
pads to change
the total
Clean Time.
Both the O'_qEN ON light and the CLEAN light will
flash when the Clean Time is finished.
After using
the dean
cycle,
the door latch and the
Oven
Set knob
must be returned
to their original
positions
before you can use the oven.
When
the CLEAN
light
flashes,
slide the latch
handle
to the left as far as it will go, turn the
Oven
Set knob
to OFF
and open
the door°
Never force the latch
handle.
Wait until the
CLEAN
light flashes and
the latch slides
easily.
Forcing
the latch handle
may damage
the door lock.
To Stop
A Clean
Cycle
1. Turn the Oven Set knob to OFE
2. Wait until the oven has cooled below the locking
temperature
to unlatch
the door. You will not be
able to open
the door right away unless the oven has
cooled below the locking
temperature.
After
a Clean
Cycle
You may notice
some
white
ash in the oven. Just
wipe it up with a damp
cloth after the oven cools_
If white spots
remain,
remove them with a soap-filled
steel wool pad. Be sure to rinse thoroughly
with a
vinegar and water mixture° These
deposits
are usually a
salt residue that cannot
be removed
by the clean cycle°
If the oven is not dean
after
one dean
cycle,
repeat
the cycle.
NOTE:
• You cannot
set the oven for cooking
until
the oven is
cool enough for the door to be unlatched.
• While
the oven is self-cleaning,
you can press the
CLOCK
pad to display
the time of day. To return
to the clean count down,
press the COOK
TIME
ONIOFF
pad.
(continued next page)
25
Publicidad
