Sears Kenmore 72471 Manual Del Usuario página 43

Questions? Before You Call for Service...
PROBLEM
TOP BURNERS DO NOT
LIGHT OR DO NOT
BURN EVENLY
BURNER FLAMES VERY
LARGE OR YELLOW
SURFACE BURNERS
LIGHT BUT OVEN
DOES NOT
POSSIBI_ CAUSE
• Make sure electrical plug is plugged into a live power oudet.
• Burner holes on the side or around the top of burner may be clogged° Remove
burners (on models with standard twin burners) or burner heads (on models
with sealed burners) or burner caps on spill-proof models, and clean them
v¢ith a sewing needle or twist tie. Make sure you do not enlarge the holes.
On spill-proof models, check electrode area for' burned-on food or grease.
° Make sure drip pans (on some models) are installed correctly.
• If range is connected to LP gas, contact the person who installed your range
or made the conversion.
• The oven gas shut-offvalve may have accidentally been moved during
cleaning or moving.
To check the oven gas shut-offvalve on standard twin burner models, raise
the cooktop and look for the gas shut-off lever at the extreme right rear corner.
Follow the directions in box A or B that match your regulator type.
Lever shown dosed
PULL TO OPEN
Standard Twin Burner Models Standard Twin Burner Models
To check the oven gas shut-offvalve on sealed burner models, remove the
storage drawer, broiler drawer or kick panel and look for the gas shut-off
lever at the back of the range.
Sealed Burner Models
(continued next page)
43