Publicidad
Idiomas disponibles
Idiomas disponibles
Surface
Cooking
Lighting
Instructions
Your surface burners
ate lighted
by electric ignition,
eliminating
the need for standing
pilots with
constantly
bus'ning
flames.
In case of a power
failure,
you can light the surface
burners
on your range with a match_ Hold
a lighted
match
to the burner,
then
tus'n the knob to the LITE
position°
Use extreme
caution
when
lighting
burners
in this manner.
Surface
burners
in use when
an electrical
power
failure
occurs
will continue
to operate
normally°
The electrode
of' the spark igniter is exposed.
When
one busner
is mr'ned to LITE, a/! the burners
spark.
Do not disassemble
ot clean around
any burner
while
another
bus'her is on. An electric shock may result,
which
could cause you to knock over hot cookware.
Surface
Burner
Controls
The toaobs that turn
the surface
burners
on and off are
located
on the control
panel
in front
of' the burners.
The
two knobs
on the left control
the left front
and
left rear burners.
The two knobs
on the right control
the right f_ont and right rear burners.
On ranges
with sealed
burners:
. The smaller
burner
(right rear position)
will give
the best simmer
results.
It offers precise
cooking
performance
for delicate
foods,
such as sauces or
foods which
need to cook over low heat for a
long time.
It can be turned
down to a very low
simmer
setting.
" The right fi'ont burner
is higher
powered
than the
others
and will bring liquids
to a boil quicker
(natural
gas installations
only).
Before
Lighting
a Burner
" If' drip pans are supplied
with your range,
they
should
be used at all times_
- Make
sure all grates on the range are in place before
using
any burner.
Publicidad
