Publicidad
Idiomas disponibles
Idiomas disponibles
12
Special parameters for High Speed series
The High Speed (/HS) series is a family of digital Brushless high speed sliding motor units for sliding gates
weighing up to 600 kg (TW90/600/HS - TW90/620/HS) and dedicated exclusively to residential applications.
High Speed technology makes it possible for the automation system to operate 100% faster than a
conventional system, and allows independent management of speed, acceleration, deceleration and the
safety devices used in the system.
Note: As the mechanics of the gate is unknown, to guarantee the maximum safety of the installation, we
recommended to use sensitive edges.
The additional parameters for enabling High Speed technology are indicated as follows.
Selecting automation system model
ATTENTION! The value of parameter
NOTE: in the case of resetting to the standard factory parameters, the value of the parameter is not changed.
Setting deceleration during opening
Setting deceleration during closing
Setting start acceleration during opening
Setting start acceleration during closing
= the gate accelerates rapidly at start of manoeuvre ...
manoeuvre.
Setting opening speed
N.B.:
Setting closure speed
N.B.:
N.B.: to set the constant speed deceleration space, see parameters
76
is set at the factory to select the motor model (
= the gate decelerates long before the mechanical
= the gate accelerates slowly and progressively at start of
, see table below). If this value
and
on chapter 12.
Publicidad
