Harbor Breeze MEGALODON AR22-100BN Manual Del Usuario página 11

WIRING
2. Wrap electrical tape (not included) around
each individual wire nut (AA) down to the
wire.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections. Place GREEN and WHITE
connections on opposite side of box from the
BLACK connections.
Turn spliced/taped wires upward and gently
push wires and wire nuts (AA) into outlet box.
3
Outlet Box
Black (AC IN from
Outlet Box)
Hardware Used
BB
Wire Nut
3. To install wall control, remove existing wall
switch. Wire one of the wall controls with
wire connectors provided as shown in
diagram at above.
Wrap each wire connector separately with
electrical tape as an extra safety measure.
Gently push wires and taped wire connectors
into outlet box.
Black
Black (AC IN L)
Black (TO MOTOR L)
(wiring for wall control)
x 2
2
Wall Control
Press the faceplate firmly onto front of wall
control. Attach wall control to outlet box and
secure with screws from original wall switch.
Attach wall plate (included) to wall control using
2 screws provided with the wall control.
11
Face
Plate
Wall Plate