Rational VarioSmoker Manual De Instrucciones Original página 21

5 | Operation
fault . Five stages of pre-smoking
are available. Each pre-smoking stage
is assigned to 20 minutes, i.e. :
Stage 1 takes 20 minutes
n
Stage 2 takes 40 minutes
n
Stage 3 takes 60 minutes
n
Stage 4 takes 80 minutes
n
Stage 5 takes 100 minutes
n
Once pre-smoking is complete, the first
cooking step will start. The VarioSmoker
will be controlled automatically during the
cooking path. If you pull the USB cable
from the power supply during operation, a
message will appear on the display and a
warning alarm will sound. The intelligent
cooking path visible on the combi-steamer
display will continue to run, but the Vari-
oSmoker's smoking process will be inter-
rupted. Reconnect the USB cable to the
power supply. The smoking process will
continue automatically.
Smoking process complete
1. Switch off the VarioSmoker at the
mains switch.
2. Disconnect the power cable from the
power supply.
3. WARNING! Beware of escaping
smoke fumes! Open the cabinet door.
4. WARNING! Risk of burns! If you have
smoked food with the VarioSmoker,
the VarioSmoker will be very hot.
Only touch the hot VarioSmoker with
protective gloves. Take the VarioS-
moker out of the cooking system and
place it on a fire-proof surface.
5. Leave the VarioSmoker to cool down.
IFU_80.06.576_RATIONAL_Original instructions_VarioSmoker_Con-
nector-E-F-J
6. WARNING! There is a risk of fire if
disposing of hot ashes into containers
that are not fire-proof. Leave the hot
ashes to cool down. Only dispose of
ashes in fire-proof containers. Open
the lid and dispose of the ashes.
TIP
To avoid a bitter flavour in the
n
smoked food, select a cooking cab-
inet temperature of no more than
150 °C.
Once the food has not reached the
n
desired cooking result after the time
has elapsed, dispose of the ashes, fill
with new smoking material and con-
tinue smoking the food.
This allows you to extend the
n
smoking time while keeping the food
in the smoke with the cooking cab-
inet door closed.
If you want to continue the cooking
n
path with the New batch option,
check whether additional smoking
material needs to be added.
After smoking, start the medium
n
cleaning program.
Manual programming
You can activate or deactivate the smoking
function regardless of whether you have
already attached the VarioSmoker.
Press the button
n
Press the button
n
Press the button
n
or OFFto have the option button for
activating the VarioSmoker available in
manual programming.
Press the button
n
ming mode.
Press the button+ New item
n
en
Settings.
Cooking system.
VarioSmoker ON
to enter program-
21 / 116