UNITED OFFICE UAV 190 B2 Instrucciones De Uso página 36

Shredding container size:
(container not supplied)
Length
Width
Overheating protection
This appliance is fitted with overheating protection . If the motor overheats due to
overloading, the overheat LED 5 lights up and the appliance stops . In this case,
disconnect the power cable and wait until the appliance has cooled down to room
temperature . You can then reconnect the plug to a mains power socket and take
the appliance back into use .
Safety instructions
The following safety instructions must always be adhered to when using electrical
appliances:
► Do not place the appliance in the direct vicinity of any sources of heat or
water . There is a risk of fire or of receiving an electrical shock!
► To prevent accidents, have defective plugs and/or power cables replaced
immediately by an authorised specialist technician or our Customer Service
department .
► Appliances that do not work properly or have been damaged must be
checked immediately and repaired by our customer service .
► Do not expose the appliance to rain, and never use it in a humid or wet
environment .
► Ensure that the power cable never becomes wet or moist during use .
► Only one person should operate the shredder at any time .
► Never leave the appliance unattended during operation .
UAV 190 B2
We recommend that you let the appliance cool down for about 60
minutes after 2 minutes of operation .
DANGER – ELECTRIC SHOCK!
WARNING – RISK OF INJURY!
Keep loose clothing, long hair, jewellery, etc . at a safe distance
from the cutter opening .
NEVER insert your fingers into the cutter opening .
Keep children away from the appliance . They could hurt themselves .
min . 280 mm, max . 410 mm
min . 115 mm
GB │ MT
│ 33 ■