Sun ECK FLAG Manual De Instrucciones página 32

AUTOMATIC PROCEDURE
In the automatic mode, all the operations are performed automatically: recovery and recycling,
oil discharge, vacuum, new oil reintegration, and charging. The values for the quantity of gas
recovered, quantity of oil recovered, vacuum time, quantity of oil reintegrated, and quantity of
gas charged into the system are automatically printed at the end of each single operation.
Connect the hoses to the A/C system with the quick-connect couplings bearing in mind that
BLUE must be connected to the low-pressure side and RED to high pressure. If the A/C
system is equipped with a single quick-connect coupling for high or low pressure, connect only
the relative hose.
From the MAIN MENU:
Select the AUTOMATIC PROCEDURE
Select the STANDARD VEHICLE
displayed:
OIL-UV INJECTION is disabled pressing
NOTE: When HYBRID VEHICLE is selected UV is disabled (except HYBRID UV).
INSTRUCTIONS MANUAL
MAIN MENU DD/MM/YY XX:XX PM
TANK PRESSURE
FLAG
6.32 BAR
ECK
TANK TEMPERATURE
17.9°C
REFRIGERANT AVAILABLE UV H
2735 g
, the following screen is displayed :
AUTOMATIC / OIL-UV INJECTION
STANDARD VEHICLE
or HYBRID VEHICLE
AUTOMATIC / OIL-UV INJECTION DD/MM/YY XX:XX PM
Injection setting
-31-
PAG
136ml
POE
110 ml
27ml
USED OIL
89 ml
DD/MM/YY XX:XX PM
HYBRID VEHICLE
the following screen will be