Publicidad
Idiomas disponibles
Idiomas disponibles
Use the KEYPAD to insert the value of the VACUUM TIME, press
NOTE: use the VACUUM SETTING to change the duration of the LEACK CHECK.
NOTE: if selected VACUUM TIME is lower 15 minutes the following popup warning will be
displayed:
Press
to continue, or press
Connect and open the coupling connected to the A/C system, then press
vacuum phase
INSTRUCTIONS MANUAL
QUICKSETUP / VACUUM
VACUUM TIME
(min 1 – 120 max)
TIME OF CHECK
(min 1 – 120 max)
1
2
3
4
5
6
7
8
QUICKSETUP / VACUUM
The selected vacuum time is lower than 15 minutes
The leak check could not reliable, continue?
to go back.
QUICKSETUP / VACUUM
Connect and open HP and LP couplings
To A/C system and press to continue
QUICKSETUP / VACUUM
Vacuum
01:57
A/C pressure
0 bar
-75-
DD/MM/YY XX:XX PM
2
min
1
min
.
9
0
to confirm
DD/MM/YY XX:XX PM
DD/MM/YY XX:XX PM
DD/MM/YY XX:XX PM
to start the
Publicidad
