Sun ECK FLAG Manual De Instrucciones página 47

Unscrew HP and LP coupling without disconnect from A/C system end press
The machine will recover the residual refrigerant into the service hoses, then the following
screen will be displayed:
Disconnect coupling from A/C system.
Press the symbol
Type the plate of the car, VIN, Km, Operator and press
Procedure is now successfully completed.
NOTE: Rarely, charging may not run to completion due to pressure balance. In this case, close
the high pressure tap (leaving the low-pressure side open), and switch on the A/C system.
INSTRUCTIONS MANUAL
MANUAL / OIL-UV INJECTION
Close HP and LP couplings without disconnected
from A/C system and press to continue
AUTOMATIC / EMPTY HOSES
MANUAL / OIL UV INJECTION
Disconnected HP and LP coupling from A/C system
Refrigerant charged
100 g
for printing.
MANUAL / RECOVERY
Plate
Km
q r
w e
123 a s
d
I____I z
x
DD/MM/YY XX:XX PM
DD/MM/YY XX:XX PM
Empty hoses
Hoses pressure
4.01 bar
DD/MM/YY XX:XX PM
END OF PROCEDURE
Oil injected UV injected
10 ml 20 ml
DD/MM/YY XX:XX PM
VIN
Operator
t
y u i
o
g h j k l
f
v b n m < x I
c
to confirm. BACK to return back.
-46-
to continue:
p
^