Sun ECK FLAG Manual De Instrucciones página 36

START AUTOMATIC PROCEDURE:
If gas analyzer is installed, The machine will test the purity of the refrigerant gas in the A/C
system before beginning recovery (refer to Gas analyzer instruction manual)
Connect and open HP and LP couplings (or those chosen in the previous point)
to A/C system and press
the AUTOMATIC PROCEDURE will start, and the following screen will be displayed:
The machine will continue automatically
During the recovery phase, the machine displays the quantity of refrigerant recovered, in
grams. Upon completion of recovery, the machine will stop and discharge, while automatically
displaying the used oil extracted from the A/C system during the recovery phase.
The oil discharge operation lasts 4 minutes.
INSTRUCTIONS MANUAL
AUTOMATIC / RECOVERY
Connect and open HP and LP couplings
To A/C system and press to continue
to continue
AUTOMATIC / RECOVERY
Please wait ...
Refrigerant recovered A/C pressure
0 g
Oil recovered 6.31 bar
0 ml
AUTOMATIC / RECOVERY
Refrigerant recovery
Refrigerant recovered A/C pressure
120 g
Oil recovered
2 bar
0 ml
AUTOMATIC / RECOVERY
Oil recovery
Refrigerant recovered A/C pressure
500 g
Oil recovered 0 bar
10 ml
-35-
DD/MM/YY XX:XX PM
DD/MM/YY XX:XX PM
Tank pressure
6.71 bar
Tank temperature
22.0°C
DD/MM/YY XX:XX PM
Tank pressure
6.71 bar
Tank temperature
22.0°C
DD/MM/YY XX:XX PM
Tank pressure
6.81 bar
Tank temperature
22.0°C